NEW

Portwest A130 Criss Cross Gloves - PVC

Portwest
£0.81 (£0.97 inc vat)
M Size 8
L Size 9
XL Size 10
+

Add more items to your order for greater discounts.

1+
£0.81
12+
£0.79
SAVE 2.5%
24+
£0.77
SAVE 5%
60+
£0.75
SAVE 7.5%
108+
£0.73
SAVE 10%
 
Description

The Portwest A130 Criss Cross Glove has been made for that extra bit of grip. The PVC pattern on the palm and the back of the 7 gauge glove makes it an ideal choice for general handling work duties.

 

EN 420, EN 388:2016

Features / Fabric

Features

  • CE certified

  • 7 gauge liner for dexterity

  • Knitted cuff for comfort and warmth

  • Textured pattern for enhanced grip

Materials

Polyester, Cotton
Dipping: PVC

Technical Info

Standards

  • AS/NZS 2161 .3

  • AS/NZS 2161 .2

  • EN 388:2016 - 1.1.4.1.X

  • EN 420

Documentation

Protective Gloves : General Requirements

EN420 : 2003 + A1 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

EN 388
Gloves giving protection from mechanical risks

Protection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample. 
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

Size Guide
Weight
80 g
SKU
A130ORRM
Product Code
A130
Brand
Product Reviews

Be the first to Write a Review for this item!

Verified Customer Reviews From Across the Site