Portwest A300 Nitrile Knitwrist Gloves

Portwest
£1.55 (£1.86 inc vat)
(1 Review)
M size 8
L Size 9
XL Size 10
XXL Size 11
+

Add more items to your order for greater discounts.

1+
£1.55
12+
£1.51
SAVE 2.5%
24+
£1.47
SAVE 5%
60+
£1.43
SAVE 7.5%
108+
£1.40
SAVE 10%
 
Description

This Portwest A300 is a fully coated nitrile knitwrist glove designed for applications that require additional abrasion resistance. Tough nitrile coating prevents grease, oil and water penetration. Suitable for refuse collection, utilities and maintenance.

EN 388 Abrasion Level 3

EN 420, EN 388, ANSI/ISEA 105-2011

More Portwest Gloves

Features / Fabric

Portwest A300 Features:

  • CE certified

  • Jersey cotton lining with knitwrist

  • Maximum EN level 4 abrasion

  • Fully coated for maximum liquid protection

  • Suitable for any work area where oil and grease resistance is a priority.

  • 12 gauge liner for dexterity

  • ANSI Abrasion Level 3

Technical Info

Protective Gloves : General Requirements

EN420 : 2003 + A1 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

EN 388
Gloves giving protection from mechanical risks

Protection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample. 
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

ANSI/ISEA 105-2011

American National a Standard for Hand Protection

This standard addresses the classification and testing of hand protection for specific performance properties related to chemical and industrials applications. Hand protection includes gloves, mittens, partial gloves, or other items covering the hand or a portion of the hand that are intended to provide protection against or resistance to a specific hazard.

Size Guide
Weight
94 g
SKU
A300NARM
Product Code
A300
Brand
Product Reviews
1 Review:

nitrite gloves
Rating:
30 August 2020  |  Mark

although delayed due to covid thy kept in touch with me and my item was delivered on time

Verified Customer Reviews From Across the Site