Portwest A302 Fully Dipped Nitrile Safety Cuff

Portwest
£1.63 (£1.96 inc vat)
M Size 8
L Size 9
XL Size 10
XXL Size 11
+

Add more items to your order for greater discounts.

1+
£1.63
12+
£1.59
SAVE 2.5%
24+
£1.55
SAVE 5%
60+
£1.51
SAVE 7.5%
108+
£1.47
SAVE 10%
 
Description

The Portwest A302 is an extra durable heavyweight nitrile glove, fully dipped, giving even more protection against cuts, scrapes, punctures and tears. The safety cuff feature of the A302 allows for these gloves to be removed instantly with ease.

EN 388 4.1.2.2

EN 420, EN 388

More Portwest Gloves

Features / Fabric

Portwest A302 Features:

  • CE certified

  • fully dipped

  • safety cuff

Technical Info

Standards

  • EN ISO 21420: 2020 Dexterity 5 
  • EN 388: 2016 + A1: 2018 4111X

Documentation

Protective Gloves : General Requirements

EN420 : 2003 + A1 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

EN 388
Gloves giving protection from mechanical risks


Protection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample. 
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

ANSI/ISEA 105-2011

American National a Standard for Hand Protection

This standard addresses the classification and testing of hand protection for specific performance properties related to chemical and industrials applications. Hand protection includes gloves, mittens, partial gloves, or other items covering the hand or a portion of the hand that are intended to provide protection against or resistance to a specific hazard.

Size Guide
Weight
110 g
SKU
A302NARL
Product Code
A302
Brand
Product Reviews

Be the first to Write a Review for this item!

Verified Customer Reviews From Across the Site