We are open for online orders and delivering as usual

Free shipping Orders £150+ (Mainland UK)
Print / EmbroideryService available
Credit accounts Request your account now

Portwest A511 Fortis Welding Gauntlet

Portwest A511 Fortis Welding Gauntlet

Portwest

Product Code:  A511
Brand:  Portwest


Portwest Fortis Range

The Portwest A511,This 14" welders gauntlet gives ample protection fir basic welding needs. This glove is the number one choice due to its high levels of dexterity and superior protection to the lower arm.

EN 420, EN 388, EN 12477, EN 407

Protective Gloves : General Requirements

EN420 : 2003 + A1 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

EN 388
Gloves giving protection from mechanical risks


Protection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample. 
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

Protective Gloves For Welders

EN 12477: 2001

This European standard specifies requirements and test methods for protective gloves for use in manual metal welding, cutting and allied processes. According to their performance, protective gloves for Welders are classified into two types.

Type A: lower dexterity (with higher other performance).

Type B: Higher dexterity (with lower other performance).

EN 407: 2004

This standard specifies thermal performance for protective gloves against heat and/or fire. The heat and flame pictogram is accompanied by a 6 digit number.

Requirements

Performance levels 1-4

f) resistance to a large melting metal spray

Amount of spray required to raise the glove to a certain temperature.

Performance levels 1-4

e) resistance to small melting metal spray

Amount of spray required to raise the glove to a certain temperature.

Performance levels 1-4

D) resistance to radiating heat

Time required to raise a given temperature level

Performance levels 1-4

c) resistance to convective heat

time during which the glove is able to delay the transfer of heat of a flame

Performance levels 1-4

b) resistance to contact heat

Temperature (within the range of 100 degrees to 500 degrees) at which the person wearing the gloves will not feel any pain (for a period of at least 15 seconds).

Performance levels 1-4

A) Resistance to flammability:

Time during which the material remains lit and continues to be consumed after the ignition source has been eliminated.

Click here to learn more about EN Standards

Select your product options

Availability:  

  

In stock

£3.49 (£4.19 inc vat)

+
Product Reviews

Be the first to Write a Review for this item!

Verified Customer Reviews
Rating:  
Great value.
Sunday, 22 November 2020  |  Stan

The first hi-viz vests I ordered from another supplier were quite short in length. I found these to be ideal and as soon as I saw the make I knew they would be fine because they are the same brand as we use at work. I wanted a decent hi-viz to use for my other job as. MHE instructor and these have proved to be ideal.


Rating:  
trustworthy store
Saturday, 21 November 2020  |  Tamás

I received the selected products on time and accurately. It is good that Britain is still a member of the EU


Rating:  
Excellent
Friday, 20 November 2020  |  Sandra

Just wanted to congratulate you on an excellent service, from my initial enquiry to the masks arriving it really was 10 out of 10 and so helpful and knowledgeable. Kind regards. Sandra

Safety Wear - Hi Vis - Workwear - Security Wear

BK Safetywear - Hi Vis - Safety Wear and Workwear Clothing
Pound Sterling (GBP)  Euro (EUR)  Australian Dollars  New Zealand Dollars  Malaysian Dollars  South African Dollars    Sign In | Sign Up | View Basket