Portwest A590 Heat Resistant 250 Degrees Glove

Portwest
£6.82 (£8.18 inc vat)
L Size 9
2XL Size 11
+

Add more items to your order for greater discounts.

1+
£6.82
12+
£6.65
SAVE 2.5%
24+
£6.48
SAVE 5%
60+
£6.31
SAVE 7.5%
108+
£6.14
SAVE 10%
 
Description

Portwest A590 Heat Resistant 250 Degrees Glove

The A590 is constructed from meta-aramid, the heat resistant fibre with a cotton liner, offers a long lasting glove which is heat resistant to contact heat up to 250 degrees. Seamless, ambidextrous and machine washable. Sold Singly.

Glove Length 30cm

EN 420, EN 388, EN 407

Features / Fabric

Features

  • Provides contact heat protection up to 250°C for 15 seconds
  • Robust 7 gauge liner
  • Long cuff version
  • These gloves are ambidextrous and are suitable for left or right handed users for added functionality
  • Glove Length 30cm
  • Sold in singles
  • Machine washable
  • CE certified
  • Machine washable to 30°C

Materials

  • Viscose, Cotton, Elastic
Technical Info

Standards

  • EN ISO 21420: 2020 Dexterity 1 
  • EN 388: 2016 + A1: 2018 1341X
  • EN 407: 2020 4231XX

Documentation

Protective Gloves : General Requirements

EN420 : 2003 + A1 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

EN 388
Gloves giving protection from mechanical risks

Protection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample. 
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

Protective Gloves Against Thermal Risks (Heat and/or Fire)

EN 407: 2004

This standard specifies thermal performance for protective gloves against heat and/or fire. The heat and flame pictogram is accompanied by a 6 digit number.

Requirements

Performance levels 1-4

f) resistance to a large melting metal spray

Amount of spray required to raise the glove to a certain temperature.

Performance levels 1-4

e) resistance to small melting metal spray

Amount of spray required to raise the glove to a certain temperature.

Performance levels 1-4

D) resistance to radiating heat

Time required to raise a given temperature level

Performance levels 1-4

c) resistance to convective heat

time during which the glove is able to delay the transfer of heat of a flame

Performance levels 1-4

b) resistance to contact heat

Temperature (within the range of 100 degrees to 500 degrees) at which the person wearing the gloves will not feel any pain (for a period of at least 15 seconds).

Performance levels 1-4

A) Resistance to flammability:

Time during which the material remains lit and continues to be consumed after the ignition source has been eliminated.

Size Guide
Weight
108 g
SKU
A590WHRL
Product Code
A590
Brand
Product Reviews

Be the first to Write a Review for this item!

Verified Customer Reviews From Across the Site