Portwest A620 Cut 3 PU Palm Glove

2
COLOURS
Portwest A620 Cut 3 PU Palm Glove
 Colour: GreyColour: White 

Portwest

Product Code:  A620
Brand:  Portwest


Portwest A620 Cut 3 PU Palm Glove

The A620 combining cut resistance, comfort, dexterity and grip in a seamless PU palm dipped liner.

 

EN 420, EN 388, EN 388:2016, EN 407, ANSI/ISEA 105-2011

Protective Gloves : General Requirements

EN420 : 2003 + A1 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

EN 388

Gloves giving protection from mechanical risks
Protection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample. 
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

EN 388:2016 ONLY
EN 388:2003 Standards specifies physical and mechanical aggression caused by abrasion, blade cut, tearing and puncture. EN388:2016 updates the existing standard with this new test method for abrasion, blade cut & impact resistance. EN ISO 13997:1999 (TDM Test) records cut results as a Newton value – the force of the blade on the glove material needed to cut through the material 20mm. The results are represented on a scale A-F.

5 Straight blade cut resistance EN 388:2016 ONLY
Based on the amount of force to achieve the moment of cut-through. The protection factor is then indicated on a scale from A to F

6 Impact resistance EN388:2016 ONLY
Impact-resistant properties to 5J, Performance Level P

Protective Gloves Against Thermal Risks (Heat and/or Fire) 

EN 407: 2004

This standard specifies thermal performance for protective gloves against heat and/or fire. The heat and flame pictogram is accompanied by a 6 digit number.

Requirements

Performance levels 1-4

f) resistance to a large melting metal spray

Amount of spray required to raise the glove to a certain temperature.

Performance levels 1-4

e) resistance to small melting metal spray

Amount of spray required to raise the glove to a certain temperature.

Performance levels 1-4

D) resistance to radiating heat

Time required to raise a given temperature level

Performance levels 1-4

c) resistance to convective heat

time during which the glove is able to delay the transfer of heat of a flame

Performance levels 1-4

b) resistance to contact heat

Temperature (within the range of 100 degrees to 500 degrees) at which the person wearing the gloves will not feel any pain (for a period of at least 15 seconds).

Performance levels 1-4

A) Resistance to flammability:

Time during which the material remains lit and continues to be consumed after the ignition source has been eliminated.

 


Discounts

Add more items to your order for greater discounts, these apply to every product in the gloves category.

1+
£2.38
12+
£2.32
SAVE 2.5%
72+
£2.26
SAVE 5%
120+
£2.20
SAVE 7.5%
240+
£2.14
SAVE 10%
Colour
Size

FROM
£2.38 (£2.86 inc vat)

Add to Basket to view your discounts

+
Product Reviews

Be the first to Write a Review for this item!

Customer Reviews
Rating:  
very good
Monday, 15 October 2018  |  Nicolae

very good ,recomanded!


Rating:  
My favourite work shirt
Friday, 12 October 2018  |  Marie

I love this top, so comfortable and the sizing is spot on. Great to finally find some decent hi vis for Ladies. Dries quickly. I will be buying more.


Rating:  
Excellent, polite and helpful service
Wednesday, 10 October 2018  |  Michael

would always now use BK due to their efficiency and speed...


Rating:  
Good
Tuesday, 9 October 2018  |  Andrew

It is good quality, comfortable and light, I would buy another


Rating:  
Superb Softshell jacket
Monday, 8 October 2018  |  D

Very comfortable nice deep exterior pockets with ykk zips 1 huge internal zipped pocket & 2 smaller velcro pockets. Nice padded interior too I'll be back for a few more at this price!!!