Portwest A726 Aqua-Seal Pro Glove

Portwest
£15.42 (£18.50 inc vat)
L Size 9
XL Size 10
2XL Size 11
+

Add more items to your order for greater discounts.

1+
£15.42
12+
£15.03
SAVE 2.5%
24+
£14.65
SAVE 5%
60+
£14.26
SAVE 7.5%
108+
£13.88
SAVE 10%
 
Description

Portwest A726 Hand Protection for the Toughest Tasks

Portwest ImpactPortwest AquaPortwest Therm

The Portwest A726 Aqua-Seal Pro is 100% waterproof and offers comprehensive protection for the hand against multiple hazards. TPR protective pods across the back of the lining gives excellent thermal insulation properties.

    Portwest EN388 Cut 3 B

EN 420, EN 388, EN 511, ANSI/ISEA 105-2011

Features / Fabric

Features

  • CE certified
  • Low linting construction for minimal contamination

Materials

Elastane, Neoprene Dipping: TPR
Technical Info

Standards

  • AS/NZS 2161 .2

  • AS/NZS 2161 .3

  • AS/NZS 2161 .5

  • EN 388:2016 - 3.X.3.3.B.P

  • CE

  • EN 420

  • EN 511 2.2.1.

Documentation

Protective Gloves : General Requirements

EN420 : 2003 + A1 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

EN 388
Gloves giving protection from mechanical risks

Protection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample. 
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

Protective Gloves Against Cold

EN 511:2006

The European standard specific the requirements the test methods for gloves which product against conductive cold down to -50degrees Celsius. This cold can be linked to the climate conditions or an industrial activity.

Requirements

Performance levels 0-1

c) water penetration

Performance levels 1-4

B) Resistance to contract cold

Performance levels 1-4

A) Resistance to convective cold

ANSI/ISEA 105-2011 

American National a Standard for Hand Protection 

This standard addresses the classification and testing of hand protection for specific performance properties related to chemical and industrials applications. Hand protection includes gloves, mittens, partial gloves, or other items covering the hand or a portion of the hand that are intended to provide protection against or resistance to a specific hazard. 

Size Guide
Weight
258 g
SKU
A726O4RL
Product Code
A726
Brand
Product Reviews

Be the first to Write a Review for this item!

Verified Customer Reviews From Across the Site