Portwest A790 Anti Vibration Gloves

Portwest
£12.32 (£14.78 inc vat)
M size 8
L Size 9
XL Size 10
2XL Size 11
+

Add more items to your order for greater discounts.

1+
£12.32
12+
£12.01
SAVE 2.5%
24+
£11.70
SAVE 5%
60+
£11.40
SAVE 7.5%
108+
£11.09
SAVE 10%
 
Description

Portwest A790 Designed for Specialist Tasks

Portwest ProPortwest Impact

The Portwest A790 is specially designed to reduce the effeects of impact and vibration. Excellent levels of comfort and dexterity when using powertools, jack hammers, concrete breakers etc.

Portwest EN388 2016 4142X

EN 420, EN 388, EN 10819, ANSI/ISEA 105-2011

Features / Fabric

Features

  • CE certified
  • Specially designed to reduce the effects of vibration
  • For use with jack hammers, concrete breakers etc
  • Lightweight and comfortable
  • 10 gauge liner for dexterity

Materials

  • Cotton, Nylon, Rubber Chloroprene
Technical Info

Standards

  • AS/NZS 2161 .2

  • AS/NZS 2161 .3

  • EN 388:2016 - 4.1.4.2.X

  • EN 10819 (TRm = 0.865 TRh = 0.598)

  • EN 420

Documentation

Protective Gloves : General Requirements

EN420 : 2003 + A1 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

EN 388
Gloves giving protection from mechanical risks


Protection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample. 
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

Protective Gloves : Mechanical Vibration and Shock

EN 10819: 1996

This European standard specifies a method for the laboratory measurement, the data analysis and rotting if the vibration transmissibility of gloves in terms of vibration transmission from a handle to the palm of the hand in the frequency range from 31.5 Hz to 1250 Hz. The standard is intended to define a screening test for the vibration transmission through gloves.

ANSI/ISEA 105-2011

American National a Standard for Hand Protection

This standard addresses the classification and testing of hand protection for specific performance properties related to chemical and industrials applications. Hand protection includes gloves, mittens, partial gloves, or other items covering the hand or a portion of the hand that are intended to provide protection against or resistance to a specific hazard.

Size Guide
Weight
184 g
SKU
A790BKRM
Product Code
A790
Brand
Product Reviews

Be the first to Write a Review for this item!

Verified Customer Reviews From Across the Site