Portwest AF22 Araflame Coverall

Portwest AF22 Araflame Coverall

Portwest

Product Code:  AF22
Brand:  Portwest


World Class Flame Protection

The Portwest AF22 is a winning style has a host of functional features including reflective tape for extra visibility.

Triple stitching throughout adds to the strength and durability of AF22. Certified to several EN standards optimal protection is provided for the wearer. 

INHERENTLY FLAME RESISTANT

EN ISO 11612 EN ISO 11611 EN 1149

This winning style has a host of functional features including reflective tape for extra visibility. Triple stitching throughout adds to the strength and durability of AF22. Certified to several EN standards optimal protection is provided for the wearer.

  • CE certified
  • Inherent flame resistant qualities will not diminish with washing
  • Protection against radiant
  • convective and contact heat 
  • Class 1 welding protection
  • Flame resistant industrial wash tape
  • Triple-stitched seams for extra durability
  • Radio loops for easy clipping of a radio
  • Two-way zip for quick and easy access
  • Hook and loop cuffs for a secure fit 
  • Two tier knee pad pockets allowing two positioning options
  • 50+ UPF rated fabric to block 98% of UV rays
  • 8 pockets for ample storage
  • Action back for extra freedom of movement
  • Back pocket
  • Rule pocket
  • Retail bag which aids presentation for retail sales
  • ARC1 (previously HRC1)

Fabric Specifications: 

 Afaflame Plus 220g

EN ISO 11612:2008

Protective Clothing Against Heat and Flame

The Performance requirements set out in this international standard are applicable to garment, which could be worn for a wide range of end uses, where the is a need for clothing with limited flame spread properties and where the used can be exposed to radiant, convective or contact heat or molton metal splashes.

This test uses standard methods and conditions to predict the performance of fabric/garment in the event of contact with heat or flames. Garment features such as seams, closures and logos must be tested as well as the fabric. Tests must be carried out on pre=treated components according to the manufacturers care label.

Specific Testing is listed below:

  • Dimensional Charge
  • Limited Flame Spread (A1+A2)*
  • Convective Heat (B) – 3 Levels
  • Radiant Heat (C) - 4 Levels
  • Molten Aluminium Splash (D) – 3 Levels
  • Molten Iron Splash E - 3 Levels
  • Contact Heat (F) – 3 Levels (Temp 250 Degrees Celcius)
  • Heat Resistance at a temperature of 180 Degrees Celcius
  • Tensile Strength Must meet a minimum of 300N
  • Tear Strength must meet a minimum of 15N
  • Bursting Strength
  • Seam Strength

Garment Design requires that coverage must be provided from the neck to the wrist and to the ankles.

Optional Testing includes water vapour resistance and manikin testing for overall burn prediction.

*This test must be carried out on fabric and seams.

 

EN ISO 11611: 2007

Protective Clothing for Use in Welding and Allied Processes

The International standard specifies minimum basic safety requirements and test methods for protective clothing for use in welding and allied processes (Excluding Hand Protection).

The International Standard Specifies two classes with specific performance requirements:

Class 1 is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat.

Class 2 is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.

EN ISO 11611 requires that protective suits completely cover the upper and lower torso, neck, arms and legs. There are a number of other design requirements which must be followed to prevent molten droplets lodging anywhere on the garment.

Testing must be carried out on pre-treated components according to the manufacturers care label.

  • Tensile Strength (must meet a minimum of 400N)
  • Tear Strength (Must meet a minimum of 20N)
  • Bursting Strength
  • Seam Strength
  • Dimensional Charge
  • Requirements of Leather
  • Limited Flame Spread (A1+A2)*
  • Molten Droplets
  • Heat Transfer (Radiation)
  • Electrical Resistance

*This test must be carried out on the fabric and seams.

 

EN1149 -5

Protective Clothing against the Thermal Hazards of an Electric Arc

This European Standard is part of a series of standards for test methods and requirements for electrostatic properties of protective clothing. The standard specifies material and design requirements for garments used as part of a total earthed system, to avoid incendiary discharges. The requirements may not be sufficient in oxygen enriched flammable atmospheres. This standard is not applicable for protection against mains voltages.

EN 1149 consists of the following parts:

EN 1149-1: Test Method for measurement of surface resistivty.

EN 1149-2: Test Method for measurement of the electrical resistance through a material (Vertical resistance)

EN 1149-3: Test Methods for measurement of charge decay.

EN 1149-4: Garment Test (under development)

EN 1149-5: Material Performance and design requirements.

Electrostatics dissipative protective clothing shall be able to permanently cover all non-complying materials during normal use. Conductives parts (Zips, Buttons etc) are permitted provided they are cover by the outermost material when in use.

  XS S M L XL XXL XXXL
Chest Size in INCHES 32 - 33 - 34 36 - 38 40 - 41 42 - 44 46 - 47 - 48 50 - 52 54 - 55
Chest Size in CM 80 - 84 - 88 92 - 96 100 - 104 108 - 112 116 - 120 - 124 128 - 132 136 - 140
Eur Conversions 40 - 42 - 44 46 - 48 50 - 52 54 - 56 58 - 60 - 62 64 - 66 68 - 70

Size guide produced by manufacturer.


1+ Item
£130.05
exc. VAT
5+ Items
£123.55
exc. VAT
20+ Items
£120.30
exc. VAT
50+ Items
£117.05
exc. VAT
Size:  

Availability:  

  

In stock, available for despatch

£130.05 (Exc. 20% VAT)(£156.06 Inc. VAT)

Discounts and delivery will show in the basket.

Earn 130 Loyalty Points
+

Be the first to Write a Review for this item!

More Happy Customers
Rating:  
Thanks
Friday, 22 September 2017  |  Andy

“I just want to let you know that I have received the products ordered and I am very impressed with the quality and the reflective badges placing is spot on also delivery was there when said it would be I look forward to doing repeat business with you and your company in the future. Thanks Andy”


Rating:  
Very Impressed
Friday, 25 August 2017  |  Portland

Good Afternoon Kevin,

I just want to let you know that I have received the products ordered and I am very impressed with the quality and efficiency of manufacture and delivery and I look forward to doing repeat business with you and your company in the future.

Portland Port Police.


Rating:  
Hi Vis Orange Trousers
Friday, 9 June 2017  |  Aaron

Just to confirm that our order for Hi-Vis trousers arrived this morning, all correct.

Thank you for the swift and efficient service.

Safety Wear - Hi Vis - Workwear - Security Wear - Embroidery - Printing

BK Safetywear - Hi Vis - Safety Wear and Workwear Clothing
Pound Sterling (GBP)  Euro (EUR)  Australian Dollars  New Zealand Dollars  Canadian Dollars  Malaysian Dollars  South African Dollars  United States Dollars   Sign In | Sign Up | View Basket
BK Safetywear and Workwear Contact