2
COLOURS
Portwest AF83 Araflame Insulated Winter Salopettes
 Colour: NavyColour: Orange 

Portwest AF83 Araflame Insulated Winter Salopettes

£117.55 (£141.06 inc vat)

Add more items to your order for greater discounts.

1+
£117.55
5+
£114.61
SAVE 2.5%
20+
£111.67
SAVE 5%
50+
£108.73
SAVE 7.5%
100+
£105.80
SAVE 10%

SKU:  AF83NARS
Product Code:  AF83
Brand:  Portwest

Portwest

Anti Static ARA Flame Flame Resistant PlusPortwest Anti-Static Araflame Plus Flame Resistant Range

This insulated salopette is ideal for use with the Araflame Insulated Winter Jacket. The elasticated straps allow for maximum ease of movement. Clever features include a raised back for extra comfort and protection and a concealed zip opening at the hem for easy fitting over work boots.

CE CAT IIIEN ISO 11612EN 1149

Portwest AF82 Features:

  • CE-CAT III
  • Anti-static
  • Sew on flame resistant industrial wash tape
  • Flame resistant lining for added protection
  • Side zip leg opening for easy access
  • Elasticated straps
  • Fully elasticated waistband for ultimate wearer comfort
  • 50+ UPF rated fabric to block 98% of UV rays
  • CE certified

 Portwest AF82 Fabric Information:

Shell Fabric: 93% Meta-aramid, 5% Para-aramid, 2% Carbon Fibre 200g

Lining Fabric: 100% Cotton Flame Resistant Lining 170g

Filling Fabric: 100% Polyester Flame Resistant Filling 150g

Standards

  • ELIM TESTING IN PROGRESS
  • EN ISO 11612 A1+A2, B1, C1, F1
  • EN ISO 11611 Class 1 A1+A2
  • EN 1149 -5
  • ASTM F1959/F1959M-12 ATPV 33.6 CAL/CM2 (HAF 91.1%)

Washcare

Documentation

EN ISO 11612:2015 - Protective Clothing Against Heat and Flame

The Performance requirements set out in this international standard are applicable to garment, which could be worn for a wide range of end uses, where the is a need for clothing with limited flame spread properties and where the used can be exposed to radiant, convective or contact heat or molton metal splashes.

This test uses standard methods and conditions to predict the performance of fabric/garment in the event of contact with heat or flames. Garment features such as seams, closures and logos must be tested as well as the fabric. Tests must be carried out on pre=treated components according to the manufacturers care label.

Specific Testing is listed below:

  • Dimensional Charge
  • Limited Flame Spread (A1+A2)*
  • Convective Heat (B) – 3 Levels
  • Radiant Heat (C) - 4 Levels
  • Molten Aluminium Splash (D) – 3 Levels
  • Molten Iron Splash E - 3 Levels
  • Contact Heat (F) – 3 Levels (Temp 250 Degrees Celcius)
  • Heat Resistance at a temperature of 180 Degrees Celcius
  • Tensile Strength Must meet a minimum of 300N
  • Tear Strength must meet a minimum of 15N
  • Bursting Strength
  • Seam Strength

Garment Design requires that coverage must be provided from the neck to the wrist and to the ankles.

Optional Testing includes water vapour resistance and manikin testing for overall burn prediction.

*This test must be carried out on fabric and seams.

EN ISO 11611: 2015 - Protective Clothing for Use in Welding and Allied Processes

The International standard specifies minimum basic safety requirements and test methods for protective clothing for use in welding and allied processes (Excluding Hand Protection).

The International Standard Specifies two classes with specific performance requirements:

Class 1 is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat.

Class 2 is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.

EN ISO 11611 requires that protective suits completely cover the upper and lower torso, neck, arms and legs. There are a number of other design requirements which must be followed to prevent molten droplets lodging anywhere on the garment.

Testing must be carried out on pre-treated components according to the manufacturers care label.

  • Tensile Strength (must meet a minimum of 400N)
  • Tear Strength (Must meet a minimum of 15N for class 1 and 20N for class 2)
  • Bursting Strength
  • Seam Strength
  • Dimensional Charge
  • Requirements of Leather
  • Limited Flame Spread (A1+A2)*
  • Molten Droplets
  • Heat Transfer (Radiation)
  • Electrical Resistance

*This test must be carried out on the fabric and seams.

EN 1149:2018 - Protective Clothing - Electrostatic Properties - Part 5. Material Performance and Design Requirements.

This European Standard is part of a series of standards for test methods and requirements for electrostatic properties of protective clothing. The standard specifies material and design requirements for garments used as part of a total earthed system, to avoid incendiary discharges. The requirements may not be sufficient in oxygen enriched flammable atmospheres. This standard is not applicable for protection against mains voltages.

EN 1149 consists of the following parts:

EN 1149-1: Test Method for measurement of surface resistivty.

EN 1149-2: Test Method for measurement of the electrical resistance through a material (Vertical resistance)

EN 1149-3: Test Methods for measurement of charge decay.

EN 1149-4: Garment Test (under development)

EN 1149-5: Material Performance and design requirements.

Electrostatics dissipative protective clothing shall be able to permanently cover all non-complying materials during normal use. Conductives parts (Zips, Buttons etc) are permitted provided they are cover by the outermost material when in use.

Chest XS S M L XL XXL XXXL
Inches 32 - 33 - 34 36 - 38 40 - 41 42 - 44 46 - 47 - 48 50 - 52 54 - 55
CM 80 - 84 - 88 92 - 96 100 - 104 108 - 112 116 - 120 - 124 128 - 132 136 - 140
Euro 40 - 42 - 44 46 - 48 50 - 52 54 - 56 58 - 60 - 62 64 - 66 68 - 70

Click here for more information and full size guide


Product Reviews

Be the first to Write a Review for this item!

Verified Customer Reviews
Rating:  
Excellent all round service
Wednesday, 20 October 2021  |  Nia

Brilliant quality, soft durable material plus eco friendly


Rating:  
Good gloves
Sunday, 17 October 2021  |  Claire

Brilliant price, well made durable grippy gloves. I use these for keeping my hands warm when doing yard duties at the stables.


Rating:  
Great Beanie
Sunday, 17 October 2021  |  Claire

Comfortable soft and warm, the light weight of the head light is barely noticeable and will do an excellent job of being seen on dark evenings. The hat may be too big if you have a very small head, but I would highly recommend.

View Basket
0 items | £0.00