Portwest FR21 Super Light Weight Anti Static Coverall 210gm

7
COLOURS
Portwest FR21 Super Light Weight Anti Static Coverall 210gm
Colour: NavyColour: OrangeColour: RedColour: Khaki
Colour: Royal BlueColour: BlackColour: Grey

Portwest

Product Code:  FR21
Brand:  Portwest


Portwest Anti-Static Bizflame Flame-Resistant Plus

This Portwest coverall is perfect for the extra warm weather demands of the offshore industry. Constructed with a lighter weight highly innovative flame-resistant twill fabric.

Fabric Information:

Bizflame Plus has been developed and designed using a highly innovative flame resistant fabric with added anti-static properties. Constructed from 99% Cotton and interwoven with 1% carbon fibres, 350g. Excellent tear and tensile strength offer durability while the premium quality cotton fabric unrivalled comfort. Inherent anti-staitc carbon fibre.

Bizflame Plus, 210g

Features:

  • CE certified
  • Radio loops for easy clipping of a radio
  • Hook and loop cuffs for a secure fit
  • Sleeve pocket
  • Rule pocket
  • Knee pad pockets to facilitate knee pads *Knee pads sold separately
  • Flame resistant industrial wash tape
  • Two-way zip for quick and easy access
  • 10 pockets for ample storage
  • 50+ UPF rated fabric to block 98% of UV rays
  • Guaranteed flame resistance for life of garment
  • Durable
  • strong and long lasting brass zip

EN ISO 11612:2008

Protective Clothing Against Heat and Flame

The Performance requirements set out in this international standard are applicable to garment, which could be worn for a wide range of end uses, where the is a need for clothing with limited flame spread properties and where the used can be exposed to radiant, convective or contact heat or molton metal splashes.

This test uses standard methods and conditions to predict the performance of fabric/garment in the event of contact with heat or flames. Garment features such as seams, closures and logos must be tested as well as the fabric. Tests must be carried out on pre=treated components according to the manufacturers care label.

Specific Testing is listed below:

  • Dimensional Charge
  • Limited Flame Spread (A1+A2)*
  • Convective Heat (B) – 3 Levels
  • Radiant Heat (C) - 4 Levels
  • Molten Aluminium Splash (D) – 3 Levels
  • Molten Iron Splash E - 3 Levels
  • Contact Heat (F) – 3 Levels (Temp 250 Degrees Celcius)
  • Heat Resistance at a temperature of 180 Degrees Celcius
  • Tensile Strength Must meet a minimum of 300N
  • Tear Strength must meet a minimum of 15N
  • Bursting Strength
  • Seam Strength

Garment Design requires that coverage must be provided from the neck to the wrist and to the ankles.

Optional Testing includes water vapour resistance and manikin testing for overall burn prediction.

*This test must be carried out on fabric and seams.

 

EN ISO 11611: 2007

Protective Clothing for Use in Welding and Allied Processes

The International standard specifies minimum basic safety requirements and test methods for protective clothing for use in welding and allied processes (Excluding Hand Protection).

The International Standard Specifies two classes with specific performance requirements:

Class 1 is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat.

Class 2 is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.

EN ISO 11611 requires that protective suits completely cover the upper and lower torso, neck, arms and legs. There are a number of other design requirements which must be followed to prevent molten droplets lodging anywhere on the garment.

Testing must be carried out on pre-treated components according to the manufacturers care label.

  • Tensile Strength (must meet a minimum of 400N)
  • Tear Strength (Must meet a minimum of 20N)
  • Bursting Strength
  • Seam Strength
  • Dimensional Charge
  • Requirements of Leather
  • Limited Flame Spread (A1+A2)*
  • Molten Droplets
  • Heat Transfer (Radiation)
  • Electrical Resistance

*This test must be carried out on the fabric and seams.

 

EN1149 -5

Protective Clothing against the Thermal Hazards of an Electric Arc

This European Standard is part of a series of standards for test methods and requirements for electrostatic properties of protective clothing. The standard specifies material and design requirements for garments used as part of a total earthed system, to avoid incendiary discharges. The requirements may not be sufficient in oxygen enriched flammable atmospheres. This standard is not applicable for protection against mains voltages.

EN 1149 consists of the following parts:

EN 1149-1: Test Method for measurement of surface resistivty.

EN 1149-2: Test Method for measurement of the electrical resistance through a material (Vertical resistance)

EN 1149-3: Test Methods for measurement of charge decay.

EN 1149-4: Garment Test (under development)

EN 1149-5: Material Performance and design requirements.

Electrostatics dissipative protective clothing shall be able to permanently cover all non-complying materials during normal use. Conductives parts (Zips, Buttons etc) are permitted provided they are cover by the outermost material when in use.

  XS S M L XL XXL XXXL
Chest Size in INCHES 32 - 33 - 34 36 - 38 40 - 41 42 - 44 46 - 47 - 48 50 - 52 54 - 55
Chest Size in CM 80 - 84 - 88 92 - 96 100 - 104 108 - 112 116 - 120 - 124 128 - 132 136 - 140
Eur Conversions 40 - 42 - 44 46 - 48 50 - 52 54 - 56 58 - 60 - 62 64 - 66 68 - 70

Size guide produced by manufacturer.


Discounts

Add more items to your order for greater discounts, these apply to every product in all clothing categories.

1+
£54.23
5+
£52.87
SAVE 2.5%
20+
£51.52
SAVE 5%
50+
£50.16
SAVE 7.5%
100+
£48.81
SAVE 10%
Colour
Size

FROM
£54.23 (£65.08 inc vat)

Add to Basket to view your discounts

+
Product Reviews

Be the first to Write a Review for this item!

Customer Reviews
Rating:  
Excellent service
Sunday, 12 August 2018  |  Nick

Quality service and product.


Rating:  
Superb
Sunday, 12 August 2018  |  Andrew

These trousers are perfect for my job as an HGV driver. They are very comfortable, very well made and fit exactly as expected. I will be buying more of these in the future!


Rating:  
Best quality ''Hi-Vis'' for cyclists on the market ! Highest possible safety level
Tuesday, 7 August 2018  |  Martin

I first bought these waistcoats 2 years ago though Amazon from this manufacturer. Now I again ordered 5 for all my family and friends. We all are everyday cyclists. These are the only waistcoat-style sleeved Hi-Vis tops with extremely bright orange and yellow. Highest Safety level. Not only that: the way the colours are arranged make these Hi-Vis' extremely visible - we get a lot of comments on this . To have sleeves is important for cyclists since you indicate direction with your arms - with a "normal" vest this is a problem. The quality of these sleeved waistcoats is second to none: 2 years in DAILY use, Summer and Winter, washed approximately 5x and they still look perfectly fine and do what they should do. Okay, we had to fix a few seems which is perfectly and easily done, but otherwise a perfectly long lasting product. Colours DO NOT FADE either in Sun nor with time....


Rating:  
First class service
Friday, 3 August 2018  |  Sue

Swift service and prompt delivery of quality product. Thanks SP


Rating:  
Comfortable, practical, good quality jacket
Saturday, 28 July 2018  |  Stuart

Going on the low price, I was skeptical as to the quality of this jacket when I ordered. I'm no longer skeptical. It's a great jacket & I'd buy another in a hearbeat.
It fits perfectly with none of the usual tight or loose spots that hinder welders & machinists.
It keeps out chilly draughts but doesn't boil you to death.
The fabric is easy on bare skin & wont make you itch.
It's light enough that it doesn't give you that oppressive "PPE feeling" but heavy enough that you know you're suitably protected.

The service from BKSafetyWear was second to none - my first colour of choice was out of stock & I was very quickly offered the option of a refund, a second choice or to wait on back-order. Dispatch & delivery was fast & efficient.

10/10 all round.
100% recommend Portwest gear.
100% trust BKSafetyWear to supply my small business any day!
Very many thanks!