Portwest PV54 Peak View Translucent Non Vented Safety Hard Hat Helmet

Portwest PV54 - Peakview Translucent Helmet Hard Hat Range

EN 397, 440 V.A.C

The Portwest PV54 is an exclusive design and Patented Model. Tranlucent shell to see through peak and sides: allows the wearer to look upwards without the need to tilt the head. Extra strong yet ultra lightweight Polycarbonate shell, offering UV rays protection. 6 points textile harness, adjustable size. Non Vented to prevent the ingress of dirt, dust and water.

: 100% Polycarbonate, Adjustable 50-66cm, 352g

Features:

• CE certified
• Electrical Properties ( 440Vac)
• Portwest exclusive design and patented model
• Translucent shell to see through peak and sides
• Extra strong yet ultra light weight Polycarbonate shell
• UV 400 stabilised
• 6 points textile harness
• Buckle size adjustment for easy fitting
• Soft foam sweat band included
• Compatible accessories available
• Available in an excellent choice of corporate colours
• 7 years shelf life from manufacturing date outlined in product user sheet

Mandatory Tests:

• Impact*: Energy spread to the head form must not exceed 5kN after the fall of an object of 5 kg at 1m high.
• Penetration*: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull.
• Flammability: The helmet is exposed to a flame and it must not burn with flame emission more than 5 seconds after removal of the flame.
• Impact and Penetration tests* are performed room temperature, at +50 degrees and at -10 degrees.

Optional Tests:

• Resistance at extreme temperatures: testing impact and penetration are performed at +150 degrees, at -20 degrees or -30 degrees temperatures.
• Electrical properties: Protects against a short accidental contact with electric leads under voltage up to 440 Vac.
• Lateral deformation: Protects against lateral compressions. The maximum deformation of the helmet should be less or equal to 40mm (LD)
• Molten metal splashes: The helmet is not deformed or penetrated by splashes of molten metal (MM)

Click here to learn more about EN Standards