Portwest S785 Bizflame Rain Anti-Static FR Jacket

Portwest
£95.04 (£114.05 inc vat)
S
M
L
XL
2XL
3XL
+

Add more items to your order for greater discounts.

1+
£95.04
12+
£92.66
SAVE 2.5%
24+
£90.29
SAVE 5%
60+
£87.91
SAVE 7.5%
108+
£85.54
SAVE 10%
 
Description

Portwest Anti-Static Bizflame Flame-Resistant Rain

Optimum protection is offered in this anti-static jacket from Portwest. Flame resistance coupled with superb breathable and water resistant properties ensures this garment is suitable for multi-risk environments. 

 

Features / Fabric

Features:

  • CE certified
  • Flame resistant treated waterproof fabric prevents water penetration
  • Premium flame resistant reflective tape
  • Waterproof with taped seams preventing water penetration
  • Fully lined and padded to trap the heat and increase warmth
  • Internal chest pocket
  • Storm flap front to protect against the elements
  • Pack away hood for added functionality
  • Radio loop for easy clipping of a radio
  • Phone pocket
  • Ribbed cuffs for warmth and comfort
  • 4 pockets for ample storage
  • Two-way front plastic moulded zip for quick and easy access
  • Lined for added warmth and comfort

Fabric Specifications:

  • Outer: Bizflame Rain 250g
  • Lining: 100% Cotton Flame Resistant Lining 170g
  • Filling Fabric: 100% Polyester Flame Resistant Filling, 100g

Washing Guidelines:

  • Maximum 12 Washes
  • Use non-biological powder. Do not use softener.
  • 40 Degrees Wash
Technical Info

EN ISO 14116: 2008

Protective Clothing Against Limited Flame Spread Materials and Material Aseemblies

This standard specifies the performance requirements for the limited flame spread properties of materials, material assemblies and protective clothing in order to reduce the possibility of the clothing burning and thereby itself constituting a hazard. Additional requirements for clothing are also specified.

Protective clothing complying with this standard is intended to protect workers against occasional and brief contact with small igniting flames in circumstances where there is no significant flame hazard and without the presence of another type of heat.

 

EN1149 -5

Protective Clothing against the Thermal Hazards of an Electric Arc

This European Standard is part of a series of standards for test methods and requirements for electrostatic properties of protective clothing. The standard specifies material and design requirements for garments used as part of a total earthed system, to avoid incendiary discharges. The requirements may not be sufficient in oxygen enriched flammable atmospheres. This standard is not applicable for protection against mains voltages.

EN 1149 consists of the following parts:

EN 1149-1: Test Method for measurement of surface resistivty.

EN 1149-2: Test Method for measurement of the electrical resistance through a material (Vertical resistance)

EN 1149-3: Test Methods for measurement of charge decay.

EN 1149-4: Garment Test (under development)

EN 1149-5: Material Performance and design requirements.

Electrostatics dissipative protective clothing shall be able to permanently cover all non-complying materials during normal use. Conductives parts (Zips, Buttons etc) are permitted provided they are cover by the outermost material when in use.

EN 13034:2005

Protective Clothing Against Liquid Chemicals

Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment). This stamdard specifies the minimum requirements for limiter use and re-useable limited performance chemical protective clothing. Limited performance chemical protective clothing is intended for use in cases of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes, against which a complete liquid permeation barrier (at a molecular level) is not required.

The Standard covers both chemical protective suits (Type 6) and partial body protection (Type PB [6]).

Type 6 suits are tested using a mist or fine spray of water with a dye added to aid the assessment of leakage. The test subject wears an absorbent suit underneath the one to be tested, which absorbs any leaks and is stained by the dye.

Success or failure is determined by measuring the total area of any stains on three suits and comparing this with the requirement. A range of other tests is specified, including resistance to abrasion, tear strength, tensile strength, resistance to puncture, resistance to ignition, resistance to penetration by liquid chemicals and seam strength. In the test for liquid chemical repellency and resistance to penetration by liquid chemicals, a bank of four test chemicals is given in the standard although the requirement is that the suit material demonstrates adequate repellency and resistance to penetration against one chemical from the list.

EN 343 – Protective Clothing, Protection Against Rain

EN 343 is the harmonised European standard that applies to garments worn in adverse weather conditions. It specifies the characteristics of protective clothing against the influence of foul weather, wind and coll above –5 Degrees. The standard provides for two parameters: (Example - Class 3:1)

X (3) = Waterproofness (3 Levels) 3 is the highest

Y = (1) Breathable Properties (3 Levels) 3 is the highest

Size Guide
Chest XS S M L XL XXL XXXL
Inches 32 - 33 - 34 36 - 38 40 - 41 42 - 44 46 - 47 - 48 50 - 52 54 - 55
CM 80 - 84 - 88 92 - 96 100 - 104 108 - 112 116 - 120 - 124 128 - 132 136 - 140
Euro 40 - 42 - 44 46 - 48 50 - 52 54 - 56 58 - 60 - 62 64 - 66 68 - 70

Click here for more information and full size guide

Weight
1.80 kg
SKU
S785NARS
Product Code
S785
Brand
Verified Customer Reviews From Across the Site