Portwest ST50 Biztex Microcool 5/6 Coverall (Carton only 50 Unit)

Portwest
£153.55 (£184.26 inc vat)
M
L
XL
2XL
3XL
+

Add more items to your order for greater discounts.

1+
£153.55
12+
£149.71
SAVE 2.5%
24+
£145.87
SAVE 5%
60+
£142.03
SAVE 7.5%
108+
£138.20
SAVE 10%
 
Description

Portwest Biztex Anti Static Micro SMS Range

The Portwest Biztex ST50 coverall offers enhanced comfort and protection. It offers Type 5 and 6 protection with a breathable comfort panel. The unique design encompasses a combination of two fabrics BizTex SMS and BizTex Micro, beginning at the neck, and continuing down along the back of the body, to the knees. It provides an excellent chemical barrier and lint free properties along with extra breathability and comfort.

      

Features / Fabric

Features:

  • CE certified
  • Sealable zip storm flap for extra protection
  • Elasticated cuffs for a secure fit
  • Elasticated hem for a secure and comfortable fit
  • Ergonomically shaped hood for a perfect fit
  • Hood for added protection against the elements

Fabric:

BizTex PP/PE & SMS 60g

Technical Info

Standards

  • EN ISO 13982 Type 5 
  • EN 13034 Type 6 
  • EN 1073-2 
  • EN 1149 -5 

Washcare

Documentation

Chemical Protection

Indicates compliance with currect European standards for chemical protective clothing.

EN 13982:2004 Type 5

Dry particle suit. This specifies the minimum requirements for chemical protective clothing resistant to penetration by air borne solid particles. Protects against hazardous dust and dry particulars

EN 13034:2005

Protective Clothing Against Liquid Chemicals

Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment). This stamdard specifies the minimum requirements for limiter use and re-useable limited performance chemical protective clothing. Limited performance chemical protective clothing is intended for use in cases of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes, against which a complete liquid permeation barrier (at a molecular level) is not required.

The Standard covers both chemical protective suits (Type 6) and partial body protection (Type PB [6]).

Type 6 suits are tested using a mist or fine spray of water with a dye added to aid the assessment of leakage. The test subject wears an absorbent suit underneath the one to be tested, which absorbs any leaks and is stained by the dye.

Success or failure is determined by measuring the total area of any stains on three suits and comparing this with the requirement. A range of other tests is specified, including resistance to abrasion, tear strength, tensile strength, resistance to puncture, resistance to ignition, resistance to penetration by liquid chemicals and seam strength. In the test for liquid chemical repellency and resistance to penetration by liquid chemicals, a bank of four test chemicals is given in the standard although the requirement is that the suit material demonstrates adequate repellency and resistance to penetration against one chemical from the list.

EN1149 -5

Protective Clothing against the Thermal Hazards of an Electric Arc

This European Standard is part of a series of standards for test methods and requirements for electrostatic properties of protective clothing. The standard specifies material and design requirements for garments used as part of a total earthed system, to avoid incendiary discharges. The requirements may not be sufficient in oxygen enriched flammable atmospheres. This standard is not applicable for protection against mains voltages.

EN 1149 consists of the following parts:

EN 1149-1: Test Method for measurement of surface resistivty.

EN 1149-2: Test Method for measurement of the electrical resistance through a material (Vertical resistance)

EN 1149-3: Test Methods for measurement of charge decay.

EN 1149-4: Garment Test (under development)

EN 1149-5: Material Performance and design requirements.

Electrostatics dissipative protective clothing shall be able to permanently cover all non-complying materials during normal use. Conductives parts (Zips, Buttons etc) are permitted provided they are cover by the outermost material when in use.

Nuclear Particle

EN1073-2:2002

Protective Clothing against radioactive contamination. Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination

Size Guide
Weight
10.50 kg
SKU
ST50WHRL
Product Code
ST50
Brand
Product Reviews

Be the first to Write a Review for this item!

Verified Customer Reviews From Across the Site