Portwest AP50 Aqua Cut Pro Glove Cut Level D
Portwest AP50 Aqua Cut Pro Glove Cut Level D

Portwest AP50 Aqua Cut Pro Glove Cut Level D

Portwest
£5.48 (£6.58 inc vat)
Please select options to view stock level
S Size 7
M size 8
L Size 9
XL Size 10
XXL Size 11
Weight
100 g
+

Add more items to your order for greater discounts.

1+
£5.48
12+
£5.34
SAVE 2.5%
24+
£5.21
SAVE 5%
60+
£5.07
SAVE 7.5%
108+
£4.93
SAVE 10%
 
Description

The fully coated Portwest AP50 Aqua Cut Pro glove offers maximum cut resistance.

The first coat is a smooth nitrile and the second coat is foam nitrile, providing a secure grip and a barrier against contaminants. Elastic wrist cuff provides a secure snug fit.

EN 420, EN 388, EN 388:2016

Features / Fabric

Features

  • Level D cut resistance
  • Seamless 13 gauge liner
  • Protects against cuts and abrasion
  • Double dipping for maximum liquid repellency
  • Sandy finish for exceptional grip in water, grease or oil
  • Prevents grease, oil and water penetration
  • CE certified
  • ANSI cut level A4
  • UKCA marked

Materials

  • HPPE, Polyester, Nylon
Technical Info

Standards

  • EN ISO 21420:2020 Dexterity 5
  • EN388:2016 +A1:2018 - 4X44D
  • ANSI/ISEA 105: 2016 CUT Level A4

Documentation

Protective Gloves : General Requirements

EN420 : 2003 + A1 2009

This standard defines the general requirements for glove design and construction, innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity, water vapour transmission and absorption along with marking and information

EN 388

Gloves giving protection from mechanical risks
Protection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a specific hazard.

1 Resistance to abrasion
Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove. See table below.

2 Blade cut resistance
Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 4.

3 Tear resistance
Based on the amount of force required to tear the sample. 
The protection factor is then indicated on a scale from 1 to 4.

4 Puncture resistance
Based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.

EN 388:2016 ONLY
EN 388:2003 Standards specifies physical and mechanical aggression caused by abrasion, blade cut, tearing and puncture. EN388:2016 updates the existing standard with this new test method for abrasion, blade cut & impact resistance. EN ISO 13997:1999 (TDM Test) records cut results as a Newton value – the force of the blade on the glove material needed to cut through the material 20mm. The results are represented on a scale A-F.

5 Straight blade cut resistance EN 388:2016 ONLY
Based on the amount of force to achieve the moment of cut-through. The protection factor is then indicated on a scale from A to F

6 Impact resistance EN388:2016 ONLY
Impact-resistant properties to 5J, Performance Level P

Size Guide
SKU
AP50B8RS
Product Code
AP50
Brand

Payment & Security

Payment methods

VisaMasterCardPayPalApple Pay

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.